Prolectrical Southern Ltd

House Rewire

Full or partial house rewires for older homes and renovation projects in Bournemouth, Poole and Christchurch. Regulation-compliant work with clear communication, minimal fuss and full certification.

What we rewire

We carry out house rewires in Bournemouth as a NAPIT-registered competent person, so the work can be self-certified under Part P. That covers full house rewires for older properties where wiring is degraded, unsafe or can't support modern loads; partial rewires where work is limited to kitchens, extensions or single floors; and rewires as part of renovation and loft-conversion projects. We replace old cable runs and consumer units, install new radial and ring circuits where appropriate, update earthing and bonding, and make sure the installation meets current BS 7671 requirements and Building Regulations. Our guide to room-by-room rewiring explains when a partial rewire makes sense.

We're electricians based in Bournemouth, serving Poole, Christchurch and the surrounding area. You can see every area we cover on our areas page.

Signs your home needs rewiring

  • Old cable: black rubber or cloth-covered cable, common before the 1960s, perishes with age.

  • An old fuse board: a wooden-backed board or one with rewirable fuses (where a fuse wire is replaced by hand) instead of modern circuit breakers.

  • No RCD protection: RCDs cut the power in a fraction of a second if someone touches a live part. Older boards often have none.

  • Round-pin sockets or sockets on skirting boards: a sign the wiring hasn't been updated for decades.

  • Scorch marks, warm sockets or a burning smell: stop using the socket and have it checked.

  • Frequent tripping or flickering lights.

If you're not sure, an electrical inspection (EICR) tests the whole installation and shows exactly what needs doing.

What a rewire to current standards includes

A rewire brings the whole installation up to date. To today's regulations, that usually means:

  • Enough sockets: more double sockets in each room, placed where you'll use them, so you're not relying on extension leads.

  • A new consumer unit: with RCBOs, which give each circuit its own RCD protection so a fault on one circuit doesn't switch off the rest of the house, and surge protection.

  • Earthing and bonding: the main earth and the bonding to gas and water pipes checked and brought up to standard.

  • Smoke and heat alarms: a good time to fit mains-powered, interlinked alarms, so all of them sound when one does.

See our fuse board upgrades page.

How a rewire works, and how we reduce disruption

Every rewire begins with a clear schedule and protection plan to limit dust and damage. A rewire happens in two stages:

  • First fix: the old cables come out and new ones go in, under floors, through ceilings and in channels cut into the walls. This is the dusty part, with floorboards lifted where cables run.

  • Second fix: once the walls are made good, the sockets, switches, lights and the new consumer unit are fitted, and everything is tested.

Between the two, the walls need filling or plastering where cables were chased in. Ask at the survey what the quote includes, and plan a new kitchen or flooring for after the first fix. The power has to be off while circuits are changed over, so agree which days that will be. After completion you receive full test results, an installation certificate and clear advice on the new layout.

What affects the cost of a rewire

Every rewire is priced after a site survey. The main cost drivers are:

  • Size of the home: the number of rooms, circuits and sockets.

  • Full or partial: a kitchen or one floor costs far less than the whole house.

  • Walls and floors: solid walls take longer to chase than timber stud walls, and solid floors make cable routes harder than suspended timber floors.

  • Empty or lived in: an empty house is quicker to rewire than one where rooms have to be cleared and work fitted around you.

  • Upgrades: extra sockets, outside power, lighting or alarms.

  • Making good: whether plastering and redecorating are in the quote or done by others.

How It Works

01

Site survey & design

A full on-site inspection to record existing cabling, consumer unit condition and load requirements, followed by a bespoke circuit design and written scope for your property.

02

First and second fix installation

Controlled strip-out and installation of new cable runs, sockets, switches and consumer unit with neat first-fix wiring, followed by second-fix fittings, earthing and bonding.

03

Testing, certification & handover

Full electrical testing, remedial works if required, supply of certification and a clear handover with circuit labelling and maintenance advice.

What you get with Prolectrical Southern

Decades of rewiring experience

Over 40 years on domestic, commercial and industrial sites means confident diagnosis and practical solutions for Victorian terraces, 1930s semis and modern renovations.

Local, responsive and regulated

Based in Bournemouth with focused coverage of Poole and Christchurch for faster response, with work completed to current wiring regulations and Building Regulations and full paperwork.

Documented quality & reassurance

NAPIT registered, with a 10/10 Checkatrade score, 5-star Trading Standards recognition and clear communication throughout the project.

Frequently Asked Questions

We assess each property on site. Signs that point to a full rewire include frequent tripping, old cloth or rubber-insulated wiring, a consumer unit without RCD protection, or visible overheating. Partial rewires suit targeted issues such as a kitchen or extension. A site survey gives a clear recommendation and written scope.

Yes. Rewires typically include an upgraded consumer unit with RCD/RCBO protection, clearly labelled ways and an accessible arrangement. We advise on high-quality units and accessory choices, and supply the appropriate certification on completion.

There is inevitably disruption during first-fix works when access is needed to walls and ceilings. Many customers stay in the property while the work is phased room by room; others prefer to stay elsewhere for the busiest periods. We plan the programme to suit your schedule and keep inconvenience to a minimum.

All rewires are carried out to current wiring regulations and Building Regulations. We provide full test paperwork and an installation certificate on completion. As a NAPIT-registered competent person we can notify the work under Part P ourselves, and can liaise with building control where required.

Timescales depend on property size, access, condition of existing wiring and whether plastering or other trades are required. After the survey you get a project timetable, and we keep you updated throughout so you know each milestone and handover date.

It depends on the size of your home, full or partial, the walls and floors, and any upgrades. We price every rewire after a site survey and set out what's included.

Ready to upgrade your wiring?

Arrange a site survey in Bournemouth and surrounding areas for a clear scope, programme and compliance advice.

Book a site survey